Home › Estimate templates › Moving
Moving Estimate Template
A moving estimate prices a job with two addresses, not one — the crew, the truck, and the hours at the old place, and the stairs, the elevator, and the parking at the new one. This free moving estimate template is the mover’s estimate in depth: both addresses with their access, crew and truck by the hour with the minimum and travel time stated, stairs, heavy items, and packing on their own lines — and the two sections no competitor template leads with: the estimate type and the valuation. Build it in the free estimate maker in about a minute — no account, no watermark.
Most estimates sell labor and materials. A moving estimate sells a plan for getting a household from one front door to another, and the price only holds if the plan is complete. The inventory is the scope: every item the mover agreed to carry, named. The access is the risk: the floor, the elevator, the stairs, and the parking at both ends, priced before move day instead of discovered on it. And two choices that belong on the estimate itself — the estimate type and the valuation — decide what the customer can be charged and what a damaged item is worth. This page is written for the mover issuing the estimate, and it answers the questions the customer will ask before signing. Interstate moves are federally regulated — the estimate-type and valuation sections below are general information, not legal advice, and intrastate moves follow state rules, which vary.
What makes a moving estimate different (two addresses, one price)
On most trades, the estimate lists hours and materials at one address. On a move, the estimate lists two addresses and one price, and the price depends on both of them. The crew loads at the old place and unloads at the new one, and the time the job takes is set as much by the building as by the boxes: a third-floor walk-up with no elevator, a loading dock with a two-hour window, a street where a 26-foot truck cannot park. Leave either address off the estimate and the price is a guess; price both and the customer can check the math before the truck arrives.
The second difference is the pricing basis, and it splits on distance. A local move is usually priced by the hour: crew and truck at an hourly rate, with a minimum number of hours and a travel-time charge stated up front. An interstate move is usually priced by weight: the shipment is weighed, the charge is the actual weight times the mover’s tariff, and the estimate is a projection of that calculation. The template has to show which basis applies — hourly or weight-based — because the estimate type, the final bill, and the customer’s rights all follow from it. A local hourly estimate that never states its minimum is as incomplete as an interstate estimate that never states its weight.
The third difference is that two legal choices ride on the document itself. The estimate type — binding, non-binding, or binding-not-to-exceed — decides whether the number on the page is a promise or a projection. The valuation — released value or full value protection — decides what a lost or damaged item is worth. Neither belongs in the fine print or in a conversation the customer has to remember: both belong on the estimate, in plain words, with the price each one carries. The sections below cover both in full, because they are the two things a customer asks about after the price — and the two things a mover gets disputed about when they are missing.
What to include on a moving estimate
| Section | What goes in it |
|---|---|
| Both addresses | Street address, floor, elevator or stairs, and parking at the origin AND the destination — the access at each end, priced before move day |
| Move date & window | The date, the arrival window, and the crew size — the date the deposit books |
| Crew & truck | Crew size, truck size, hourly rate (local) or weight basis (interstate), minimum hours, and travel time — each stated, never implied |
| Inventory | Room-by-room list of everything being moved, with heavy and awkward items named — the inventory is the scope |
| Stairs & heavy items | Stairs by the flight, piano, safe, and other heavy items on their own lines with their own prices |
| Packing | Boxes, materials, and packing labor on their own lines — who packs what, and what it costs |
| Accessorial charges | Long carry, shuttle, disassembly and reassembly, waiting time — every charge the tariff allows, listed, not discovered |
| Estimate type | Binding, non-binding, or binding-not-to-exceed, stated on the face of the estimate |
| Valuation | Released value or full value protection, the declared value, and the charge — a line, not a footnote |
| Deposit & payment | Deposit amount, what it is applied to, refund terms, and when the balance is due |
| Valid-until date | The date the price stops holding — 30 days is the common default |
| What’s not included | Items the mover will not carry, services not priced, and anything the customer handles themselves — written out, not assumed |
A worked example (example numbers — use your own rates)
A local move, three-person crew with a 26-foot truck, from a second-floor apartment with stairs to a house with a driveway. Every line below is a labeled example; the structure is the point, not the rates:
| Line | Amount |
|---|---|
| Crew & truck — 3 movers + 26-ft truck, $180/hr × 5 hours | $900 |
| Travel time — 1 hour at the same $180/hr rate | $180 |
| Stairs — 2 flights at $75 per flight | $150 |
| Heavy item — upright piano, flat charge | $150 |
| Packing materials — 10 boxes at $12 each | $120 |
| Estimated total | $1,500 |
| Deposit to book the date (example amount, applied to the total) | $300 |
| Balance due | $1,200 |
Read the example the way the customer will: the crew and truck are the price, the travel time is stated instead of hidden, the stairs and the piano are their own lines instead of surprises, and the deposit is a number with a purpose — it books the date and comes off the total. If any line is missing, the customer cannot check the total, and the mover cannot defend it. On an interstate move the same structure applies, but the crew-and-truck line becomes a weight line: the estimated weight, the tariff rate, and the estimate type that says whether the number is fixed or a projection.
Binding vs non-binding vs binding-not-to-exceed
For interstate moves, federal rules from the Federal Motor Carrier Safety Administration (FMCSA) require the mover to give a written estimate before loading, and the estimate must state on its face whether it is binding or non-binding. The three types are three different promises about the same number:
| Estimate type | Final price | Most due at delivery | What changes it |
|---|---|---|---|
| Binding | Fixed for the listed items and services | 100% of the estimate | Only items or services added after the estimate, or unforeseen access (stairs, elevators, permits) — then a NEW binding estimate is required |
| Non-binding | Actual weight × tariff | 110% of the estimate | The actual weight and the services provided; the balance is billed and payable within 30 days of delivery |
| Binding-not-to-exceed | The estimate, or less if the shipment weighs less | The estimate or less | Same as binding, with the price dropping if the actual weight comes in under the estimate |
A binding estimate is a fixed price for a defined inventory and defined services. If the shipment weighs more than expected, that is the mover’s problem — the customer pays the binding figure at delivery, and nothing more, unless they added items or services or the access turned out different from what was surveyed. That is why the inventory and the access have to be right: the binding price is only as good as the survey behind it. For interstate moves the mover must base a binding estimate on a physical survey of the belongings — in person or by live or recorded video — unless the customer waives the survey in writing. A price quoted sight-unseen over the phone or the internet is a red flag the FMCSA warns about by name.
A non-binding estimate is a projection, not a promise. The final charge is calculated from the actual weight of the shipment and the mover’s tariff, so it can come in higher than the estimate — and the protection is a payment rule, not a price cap: on an interstate move the mover cannot require more than 110% of the non-binding estimate at delivery, and any remaining balance is billed afterwards and payable within 30 days. The 110% figure limits what is collected on delivery day, not what the move ultimately costs. A non-binding estimate that comes in far below three comparable bids is the classic setup for a renegotiation after the belongings are on the truck.
A binding-not-to-exceed estimate — also called guaranteed-not-to-exceed — is the customer-friendly hybrid: the mover commits to a maximum price, and if the actual weight comes in lower, the customer pays the lower number. Ask for it by name. One honest note: it is a commercial product movers offer under their own tariffs, not a separate category in the federal rules — the FMCSA’s regulations cover binding and non-binding estimates, so read how the mover defines the not-to-exceed term before relying on it. And the estimate type is not the whole story for local moves: intrastate moves follow state rules, which vary — some states require a not-to-exceed style estimate for moves inside the state, others leave it to the mover’s tariff. This section is general information, not legal advice; check the rules where the move happens.
Released value vs full value protection
For interstate moves, federal law requires the mover to offer two liability options, called valuation coverage. Valuation is the mover’s contractual liability for the goods — it is not insurance, and it is not the same as the customer’s homeowner’s policy. The choice belongs on the estimate as a line with a price, because it decides what a damaged item is worth:
| Released value protection | Full value protection | |
|---|---|---|
| Cost | No additional charge — included in the base rate | An additional fee, based on the declared value of the shipment and the deductible chosen |
| What it pays | 60 cents per pound per article — by weight, not by value | Repair, replace with a like-kind item, or pay the current market replacement value |
| The FMCSA’s example | A 50-inch TV weighing 25 pounds pays $15 (60¢ × 25 lb) | A shipment valued at $25,000 costs about $250 in valuation charges (about 1% of declared value) |
| Who chooses it | The customer must sign a specific statement on the bill of lading agreeing to it | The default — unless released value is chosen in writing, the shipment moves under full value protection |
Released value protection is free, and that is the whole of its appeal. Under it the mover is responsible for no more than 60 cents per pound per article, so a television that cost hundreds of dollars pays $15 if it weighs 25 pounds. The payout follows the scale, not the receipt. The customer has to choose it deliberately, by signing a specific statement on the bill of lading — and a mover who leaves the customer underinsured without explaining the choice is the first overcharge pattern the consumer guides warn about. Put the choice on the estimate with the number attached, so nobody discovers it after the damage.
Full value protection is the comprehensive option, and it is the default. Under it the mover is responsible for the replacement value of lost or damaged goods in the entire shipment: at the mover’s option, repair the article, replace it with an article of like kind, or pay the cost of a replacement at the current market replacement value, regardless of the item’s age. The charge is based on the value the customer declares — the FMCSA’s published example puts a $25,000 shipment at about $250, roughly 1% of declared value, so a $40,000 shipment would cost about $400 at that rate — and deductibles can reduce the cost. One limit to state plainly: items of extraordinary value — anything worth more than $100 per pound, such as jewelry, china, furs, antiques, oriental rugs, and computer software — must be specifically listed on the shipping documents, or the mover may limit liability for them. A third option exists on top of both: separate liability insurance, bought from the mover or a third party and regulated by state law, which pays above the 60-cents-per-pound floor when released value is chosen.
The deposit that books the date
A modest deposit is normal. Many movers ask for one to hold the date, often somewhere between $100 and $500 depending on the size of the move, and many ask for none at all. What the deposit does is simple: it books the crew and the truck for that date, it comes off the total, and it is refundable on the terms written on the estimate. What matters is that the terms are written down before the money moves — the amount, what it is applied to, whether it is refundable if the plans change, and the date after which it is not.
The warning sign is the opposite: a demand for a large deposit, a large share of the total up front, or full payment in advance — especially by cash, wire transfer, or a payment app with no recourse once sent. The FMCSA lists a demand for cash or a large deposit before the move as a red flag, and the Better Business Bureau warns that a mover asking for a large down payment may be a fraudulent business. There is no federal cap on deposits, so the rule of thumb is a question, not a number: what is the refund policy, in writing, and what happens to the deposit if the move is canceled? A mover that cannot answer in writing is telling the customer something. And the estimate should carry the answer — the deposit line, the refund terms, and the cancellation window, next to the total, not in a separate conversation.
Validity periods
A moving estimate holds for as long as the date printed on it — and 30 days is the common default, the same as on most trade estimates. Print the date on the estimate itself, next to the total, not buried in an email thread. After the date passes, re-confirm the price before honoring the number: the crew rate, the fuel, and the tariff behind it can all move in that time, and honoring a stale price on a full household move is how a profitable job turns into a loss. Re-quoting after the date is expected, not rude.
When the calendar is tight, a shorter validity is the honest choice. Summer weekends, month-end dates, and the last days of a lease book fast, and a price held for 30 days on a date that will be gone in a week invites a booking the mover cannot keep. The validity date protects both sides: the customer knows the price is real and the date is theirs, and the mover is not locked into a number the costs behind it no longer support. If the customer needs longer to decide, say so on the estimate — a new date with a new price is better than a stale number nobody trusts.
How to make one free with Billia
- Open the free estimate maker and enter your business and client details.
- Enter both addresses with their access — floor, elevator or stairs, and parking at the origin and the destination — plus the move date and the arrival window.
- Add the crew and truck by the hour with the minimum and travel time stated, the room-by-room inventory with heavy items named, and stairs, packing, and accessorial charges on their own lines.
- State the estimate type — binding, non-binding, or binding-not-to-exceed — and the valuation, with the declared value and the charge, then the deposit and the valid-until date (30 days is the common default).
- Enter your email: we send the PDF right away, and you can also download it directly. No account needed.
Prefer Word, Excel, or Google Docs? Use the layout above as your reference — or skip the formatting and generate the PDF directly. For the estimating craft itself — scope first, line items, exclusions, and validity — read how to write an estimate.
Estimate the move in 60 seconds
Free. No account. No watermark. Just a professional PDF.
Create my estimate — freeFrequently asked questions
What should a moving estimate include?
Both addresses with their access (floor, elevator or stairs, parking), the move date and arrival window, crew and truck by the hour with the minimum and travel time stated, a room-by-room inventory with heavy items named, stairs, packing, and accessorial charges on their own lines, the estimate type, the valuation choice with its charge, the deposit and payment terms, a valid-until date, and what is not included. On an interstate move the estimate must be in writing and must state whether it is binding or non-binding.
What is the difference between a binding and a non-binding estimate?
A binding estimate is a fixed price for the listed items and services: the customer pays that amount at delivery, and it only changes if items or services are added or the access turns out different, in which case a new binding estimate is required. A non-binding estimate is a projection: the final charge is the actual weight times the mover’s tariff, so it can come in higher — but on an interstate move the mover cannot require more than 110% of the estimate at delivery, with the balance billed and payable within 30 days. A binding-not-to-exceed estimate caps the price and lets it drop if the shipment weighs less.
What is released value protection?
Released value protection is the free, minimal liability option on interstate moves: the mover is responsible for no more than 60 cents per pound per article, so a 50-inch TV weighing 25 pounds pays $15 — the FMCSA’s own example. It costs nothing extra, but it pays by weight, not by value, and the customer must choose it by signing a specific statement on the bill of lading. Unless released value is chosen in writing, the shipment moves under full value protection, which pays the current market replacement value.
How long is a moving estimate valid?
As long as the date printed on it — 30 days is the common default. Print the date next to the total. After it passes, re-confirm the price before honoring the number, because crew rates, fuel, and tariffs can move in that time. When the calendar is tight — summer weekends, month-end dates — a shorter validity is the honest choice, and the estimate should say so.