Home › Timesheet template › Contractor

Contractor Timesheet Template

A contractor’s timesheet is not a punch card and not a payroll form. It is the job-costing record: one row per worker per day, the job site on every row, and subtotals per job that become the invoice — with the invoice number on the sheet so the sheet doubles as the backup. This free contractor timesheet template is the contractor’s layout in depth: the columns, the daily crew sheet, subcontractor billing to a general contractor, and the overtime rules that actually apply on a job site.

Most contractor timesheet templates are built for payroll — clock in, clock out, send it to the office. This one is built for the person who has to prove the hours: the crew lead tracking a crew across job sites, and the subcontractor billing hours to a general contractor. Every section below ends at the same place — the invoice. Billia does not make a timesheet app, and this page does not pretend otherwise: it is the template itself, laid out so you can copy it into a spreadsheet in two minutes and print it, and the free invoice generator is where the week’s hours become the invoices. For the freelancer’s solo sheet, see the weekly timesheet template; for the overview of both layouts, the free timesheet template.

The contractor’s timesheet (job costing, not payroll)

An employee timesheet answers one question: when were you on the clock? A contractor timesheet answers a different one: where did the hours go, and who pays for them? The unit is the job, not the pay period. A crew can work two jobs in a week, or two jobs in a day, and the hours have to land on the right job — or the job costing is fiction, the invoice is wrong, and the argument starts from the numbers instead of the work.

Two sheets, one system. The daily crew sheet is one page per site per day, filled in by the supervisor, with the whole crew on it — that is the sheet that gets filled in on site. The weekly sheet is one per worker per week, the record the office works from for payroll and for the invoice. Both carry the same columns, so the numbers match when the office checks one against the other.

The header names the job: your company, the job site, the job or contract number, the week, and — once the invoice goes out — the invoice number the sheet backs up. The job number is the piece people skip, and it is the piece that matters: “Maple Street” is a guess when there have been three Maple Street jobs in a year; job #1042 is a record. Put the invoice number on the sheet when the invoice is issued, so the sheet and the invoice find each other six months from now.

Hours written on the day are facts. Hours written on Friday are guesses. Keep the sheet with the crew and fill it in before they leave site — a start and finish time written on the day is harder to argue with than a total remembered at the end of the week.

What goes on every row

Every row on a contractor timesheet needs the same ten columns. They are close to the freelancer’s columns, with three additions that matter on a job site: the worker’s name, the job site and job number, and the start and finish times — because on a crew sheet, who did it and where are as billable as how long it took.

ColumnWhat goes in it
DateThe calendar day the work happened
WorkerWho did the work — one row per worker, never a crew lumped into one row
Job site / job #Where the work happened, and the job or contract number it belongs to
Start / FinishThe actual times on site — harder to argue with than a total
BreakUnpaid break time, in minutes — it comes out of the hours
HoursFinish minus start, less the break, as a decimal — 8.5, never 8:30
RateThat worker’s hourly rate for this job
BillableYes or no — the client pays for this row or not
AmountHours × rate on billable rows; $0 on the rest
NotesWhat got done, and what held it up — weather, waiting on materials, inspection

One row per worker per day per job. That is the rule that makes a contractor sheet work: Dana on Maple Street on Monday is one row, and if Dana also spent two hours on Cedar Lane that afternoon, Cedar Lane gets a second row. The moment a row holds two jobs, the per-job subtotals at the bottom stop adding up, and the invoice they feed stops being checkable.

Hours are finish minus start, less the unpaid break. 7:00 to 16:00 with a 30-minute break is 8.5 hours. Write hours as decimals, always — 8.5 means eight and a half hours; 8:30 is a time of day, and to a spreadsheet it is a fraction of 24 hours that makes every sum after it come out wrong. Watch the overnight shift, the classic spreadsheet bug: a shift that runs past midnight needs the date on the finish time, or the subtraction goes negative.

Here is what a filled-in day looks like — Monday, November 9, Maple Street fit-out, job #1042:

DateWorkerJob siteStartFinishBreakHoursRateAmount
Mon Nov 9Dana R. (foreman)Maple St fit-out #10427:0016:3030 min9.0$65$585.00
Mon Nov 9Luis M. (electrician)Maple St fit-out #10427:0016:0030 min8.5$55$467.50
Mon Nov 9Priya K. (electrician)Maple St fit-out #10427:0016:0030 min8.5$55$467.50
Day total26.0$1,520.00

The day sheet records the hours at the regular rate. Overtime gets priced on the week sheet, not here — Monday’s ninth hour becomes overtime only when the week passes 40 hours, which is the next section. The notes column is where the day earns its keep: “second-floor framing complete; held up 40 minutes waiting on the lumber delivery” is the sentence that answers the client’s question three weeks later, when nobody remembers the delivery was late.

Keep the non-billable rows. A warranty callback, an hour of paperwork, a site visit that produced no chargeable work — they feel like confessions, but they explain why a 45-hour week produced 40 billable hours. If you only write the billable rows, next quarter you will price a job from a week that never happened. And if the client or the GC requires sign-off, two signature lines at the bottom — the worker’s and the supervisor’s — turn the sheet into an approved record instead of your word against theirs.

Subcontractor billing to a GC

For a subcontractor, the timesheet is the backup for the pay application. The general contractor bills the owner against a schedule of values — the contract sum split into line items — and the subcontractor bills the general contractor the same way: progress against the subcontract, usually monthly, on the GC’s billing cutoff. The invoice is the claim; the timesheets are the proof that the hours in it actually happened.

What the GC’s office checks before it approves a pay application: the job number matches the subcontract, the dates fall inside the billing period, the hours match the work the GC’s own supervisor saw on site, and the math adds up. The sheet that passes that check has the job number, the dates, the hours, and the supervisor’s signature on every page. A missing document is a reason to reject the whole package and push payment to the next billing cycle — so send the backup with the invoice, not after it gets asked for.

Retainage is the part of the payment the GC holds back: a percentage of each progress payment — typically 5 to 10 percent on private work — kept until the project reaches substantial completion. It is a contract term, not a deduction from the hours, so show it as its own line on the invoice, never folded into the labor: the timesheet proves the gross amount, and the retainage line shows what is held and why. On federal work the ceiling is 10 percent, and it is held only when progress is unsatisfactory or to cover what remains at substantial completion.

Then there is the payment clause, which decides when the money actually arrives. A pay-when-paid clause means the GC pays the sub within a set window after the owner pays — commonly 7 to 14 days. It is a timing rule: the GC can wait a reasonable time for the owner’s money, but still owes the sub. A pay-if-paid clause is different and harsher: it makes the owner’s payment a precondition for the sub’s payment at all, and some states restrict it. Read the clause before you sign the subcontract, not after the check is late. Either way, expect the full cycle from submission to money in the bank to commonly run 30 to 60 days.

Two documents travel with the invoice. The first is the conditional lien waiver: it takes effect only once payment clears, so it is the waiver to sign with the invoice — never sign an unconditional waiver before the money lands, because it gives up your lien rights immediately whether or not you get paid. The second is the W-9: the GC needs it before the first payment, and without a valid one the IRS requires backup withholding of 24 percent. Agree a fixed monthly billing cutoff with the GC up front, so the sub’s billing rolls into the GC’s owner application instead of missing it by five days and waiting a month. For the invoice itself, use the subcontractor invoice template — it carries the GC company, job site, contract reference, change orders, and retainage line this billing needs.

Overtime and the 40-hour week

The contractor’s sheet is where overtime shows up, because overtime is a weekly number. Under the federal Fair Labor Standards Act, a covered employee who works more than 40 hours in a workweek must be paid at least one and a half times their regular rate for every hour past 40. A few states go further: California, Alaska, and Nevada also require overtime after 8 hours in a single day. Federal law has no daily trigger and no weekend or holiday premium — only the 40-hour week counts.

Here is the catch, twice over. First, for the contractor’s own employees, that law applies — the 40-hour week counts, and the sheet must split regular hours from overtime so payroll can price them. Second, for a subcontractor billing the GC, overtime is a contract term: nobody owes the sub overtime unless the subcontract says so. And the sub’s own crew’s overtime is the sub’s payroll problem, not the GC’s — the GC pays the hours the subcontract prices, at the rates the subcontract sets.

Settle overtime at the week level, not the day. A 9-hour Monday is not overtime by itself — it becomes overtime only when the week passes 40 hours, unless a daily-trigger state or the contract says otherwise. That is why the day sheet above prices Monday at the regular rate, and the week sheet below is where the split happens. Put the overtime rows on the week sheet with their own rate, not folded into the regular hours: a single blended line invites exactly the argument the split prevents.

The math, on the same crew’s full week on Maple Street — example rates of $65 for the foreman and $55 for the electricians:

WorkerRateRegular hrsOvertime hrsTotal hrsAmount
Dana R. (foreman)$6540.05.045.0$3,087.50
Luis M. (electrician)$5540.02.542.5$2,406.25
Priya K. (electrician)$5540.0040.0$2,200.00
Week total120.07.5127.5$7,693.75

Dana’s 5 overtime hours price at $97.50 (1.5 × $65), so her week is 40 × $65 = $2,600 plus 5 × $97.50 = $487.50. Luis’s 2.5 overtime hours price at $82.50 (1.5 × $55), adding $206.25 to his $2,200. The week totals 127.5 hours and $7,693.75 — and because the whole week was on the one job, that is also the Maple Street invoice amount, before retainage. Agree the overtime term in the subcontract before the extra hours happen, not after: hours over 40 in a week at 1.5× is the convention every GC already understands, which is exactly why it works as a contract term.

From timesheet to invoice

The timesheet is the input; the invoice is the output. For a contractor, the conversion runs per job, not per worker — the GC pays by job, so the invoice is organized by job, with the crew’s hours inside it:

  1. Total per job, not per worker. The week above is one job, so its $7,693.75 is the Maple Street invoice amount. A week split across two jobs produces two subtotals and two invoices — never one invoice carrying two jobs, or a dispute on one holds up payment for both.
  2. Quote the job and the invoice number. The invoice carries the job or contract number, the billing period, and its own invoice number — and that invoice number goes back onto the timesheet header, so the sheet and the invoice match each other. Six months from now, the number is how either document gets found.
  3. One line per worker or per trade. Each line shows the hours, the rate, and the amount — Dana’s 45 hours at $65 with the 5 overtime hours on their own line, Luis and Priya the same. Materials go on separate lines, with receipts attached; never fold materials into the labor hours.
  4. Show retainage as its own line. On the week above, 10 percent retainage is $769.38, so the invoice reads $7,693.75 gross, less $769.38 retainage, net due $6,924.37. The client sees exactly what is held and why, and the retained amount is a number to chase at substantial completion instead of a mystery.
  5. Attach the signed sheets and the conditional lien waiver. The invoice is the bill; the timesheets are the proof. GCs pay itemized invoices with the record attached, and argue with lump sums that have none.
  6. Send it on the billing cutoff day. The GC’s owner application has a cutoff; an invoice that misses it waits a full cycle. The timesheet is finished Friday; the invoice goes out Friday.

For the invoice itself, the general contractor invoice template carries the GC-facing fields — management, subcontractors, materials at cost — and how to write an invoice covers the line items, the numbering, and the payment terms that belong on every bill. The timesheet tells you what to charge; the guide tells you how to present it.

How to use it free

  1. Copy the column layout above into a spreadsheet — Excel, Google Sheets, or Numbers all work — or print the blank layout and fill it in by hand. One file per job per week, named so you can find it later (1042-maple-st-2026-11-09, for example).
  2. Fill in the header: your company, the job site, the job or contract number, the week, and the rates in play. Leave a space for the invoice number — it goes on the sheet when the invoice is issued.
  3. Log each worker’s hours the day they happen, in decimal hours, one row per worker per day per job, with start and finish times and the unpaid break. The supervisor signs the day’s sheet before the crew leaves site.
  4. On Friday, total the sheet: hours per worker, then per job — regular and overtime split, the retainage line noted, and the invoice number added. Check the non-billable rows are still there and the break was taken out of every row.
  5. Turn each job’s subtotal into an invoice with Billia’s free invoice generator — the hours become the line items, the signed timesheet and the conditional lien waiver go along as backup, and the PDF arrives in your inbox. No account, no watermark.

That is the whole system: a sheet the crew fills in on site, a Friday routine that totals it per job, and an invoice that writes itself from the week’s subtotals. Keep one more habit with it — save the finished timesheet with the invoice it produced, in the same folder, under the same name. Six months from now, when a GC asks what that invoice was for, the answer is one search away.

Turn this week’s crew hours into an invoice

Your per-job subtotals are the line items. Billia’s free invoice generator turns them into a clean PDF — no signup, no watermark.

Create my invoice — free

Frequently asked questions

What should a contractor timesheet include?

A header with your company, the job site, the job or contract number, and the week — plus the invoice number once the invoice is issued. One row per worker per day per job, with the date, the worker, the job site, start and finish times, the unpaid break, the hours in decimals, the rate, and whether the row is billable. Per-job subtotals at the bottom, and the worker’s and supervisor’s signatures when sign-off is required.

How do I track crew hours by job?

Use a daily crew sheet — one page per site per day, filled in by the supervisor — with one row per worker per day per job. A worker who moves between two sites in a day gets two rows, so the hours land on the right job. Fill it in on site before the crew leaves, have the supervisor sign it, and roll the days up into a weekly sheet per worker that splits regular hours from overtime and subtotals per job.

What is the difference between a contractor and an employee timesheet?

An employee timesheet is for payroll: the employer records when each employee was on the clock, and owes overtime at 1.5 times the rate for hours over 40 in a week under federal law. A contractor or subcontractor timesheet is for billing: the hours are the backup for the invoice to the client or the general contractor, so every row carries the job site and job number, and overtime exists only if the contract or subcontract says so. Same hours, different purpose — one feeds payroll, the other feeds the invoice.

How do I bill hours to a general contractor?

Bill as a progress pay application against the subcontract, on the GC’s monthly billing cutoff, with the signed timesheets attached as backup and a conditional lien waiver alongside. Quote the job or contract number and the invoice number on both the invoice and the sheet. Show retainage — typically 5 to 10 percent on private work — as its own line, never folded into the hours. Under a pay-when-paid clause the GC commonly pays 7 to 14 days after the owner pays, and the full cycle from submission to money in the bank commonly runs 30 to 60 days.